Zte v9800 User Manual page 107

Lte/wcdma/gsm
Hide thumbs Also See for v9800:
Table of Contents

Advertisement

The battery or battery charger is
damaged.
The phone's temperature is be-
Battery not
low 0°C or higher than 45 °C.
charge
Poor contact between the bat-
tery and charger.
The standby time is related to
your service provider system
configuration. The same phone
used with different service pro-
viders' systems will not pro-
vide exactly the same length of
standby time.
The battery is depleted. In high-
Shortened
temperature environments, bat-
standby time
tery life will be shortened.
If you are not able to connect
to the network, the phone will
continue to send out signals as
it attempts to locate a base sta-
tion. Doing so consumes battery
power and will consequently
shorten standby time.
Cannot switch
Battery power has been deplet-
your phone on
ed.
(U)SIM card malfunction or
damage.
(U)SIM card
error
(U)SIM card inserted improp-
erly.
Contact the dealer.
Adjust the battery charging
environment to avoid ex-
tremes of temperature.
Check all connectors to
make sure all connections
have been properly made.
If you are located in an area
where signaling is weak,
temporarily power off the
phone.
Use a new battery.
Change your location to
one where the network is
accessible, or temporarily
turn off your phone.
Recharge the phone's bat-
tery.
Take the (U)SIM card to
your service provider for
testing.
Insert the (U)SIM card prop-
erly.
107

Advertisement

Table of Contents
loading

Table of Contents