Page 3
GSM Dual-Band GPRS Digital Mobile Phone The manual is applicable for ZTE-G F120 mobile phone.
Page 4
ZTE Corporation. ZTE Corporation reserves the right to make modifications on print errors or update specifications in this manual without prior notice. Version 0.1 in Jun. 2008...
Table of Contents Before Use ................1 1.1 Introduction ..................1 1.2 Safety Instructions................2 1.3 Safety Warnings and Precautions ..........2 1.4 Parts Definition................8 1.5 Battery ..................12 1.5.1 Installing the Battery............12 1.5.2 Removing the Battery............13 1.5.3 Charging the Battery ............13 1.6 Insert and Remove SIM Card............15 1.7 Insert and Remove Memory Card ..........15 1.8 Power On/Off ................17 2 Making and Receiving Call .............19...
Page 6
3 Call History ................25 3.1 View .................... 25 3.2 Delete..................25 3.3 Call Time ..................26 STK Intelligent Service ............27 5 Entertainment ...............28 5.1 Games ..................28 5.2 Melody Compose ................ 28 6 Multimedia................30 6.1 File Manager ................30 6.2 Camera ..................31 6.3 Audio Player ................
錯誤! 尚未定義樣式。 Before Use 1.1 Introduction Thank you for choosing ZTE Corporation’s ZTE-G F120 GSM/GPRS 900/1800MHz Digital Mobile Phone. To guarantee your mobile phone always in its best condition, please read this manual carefully and keep it for future use.
1.2 Safety Instructions If your mobile phone is lost or stolen, notify your network service provider immediately to prevent others from abusing it. Meanwhile you need provide your service provider with your mobile phone’s ESN, which is printed on the label on the back of your mobile phone (remove the battery and find it).
Page 13
錯誤! 尚未定義樣式。 of an electronic device or other problems. Pay special attention when you use your mobile phone near audiphone, pacemaker and/or other medical electronic devices, fire detector, auto-door and/or other auto-control equipments. For details on the influence caused by your mobile phone on pacemaker or other medical electronic devices, please consult the manufacturer or your local distributor.
Page 14
Waterproof Keep your mobile phone away from water. This may cause overheating, electric leakage or failure if water or any other kind of liquid enters your mobile phone. Disassemble Do not disassemble or reassemble your mobile phone because this might cause damage, electric leakage or circuit failure. Antenna Do not use your mobile phone if your antenna is damaged because this may cause body injury.
Page 15
錯誤! 尚未定義樣式。 manufacturer. Using non-original accessories may affect the mobile phone’s performance, violate the warranty provisions or relevant national regulations about telecom terminals, or even cause body injury. Explosion Areas Please strictly follow relevant laws and regulations to turn off your mobile phone in or near the explosion areas.
Page 16
cause fire or explosion. Do not press with great force when installing the battery because this may result in leakage, overheating, explosion or fire. Do not disassemble or reassemble the battery because this may result in leakage, overheating, explosion or fire. If the battery becomes hot, changes in color or gets deformed during the course of use, charging or storage, please immediately stop using and replace.
Page 17
錯誤! 尚未定義樣式。 phone and charger. Do not short-circuit the charger because this might cause electric shock, smoldering or damage. Do not charge the battery in direct sunshine, near dampness, dust, vibration, TV set, or radio (may affect the image, sound), etc. Do not use the charger if the power cable is damaged because this might cause fire or electric shock.
Key Definitions Move the cursor to the left/right; Left/right In idle mode, press left key to enter “Multimedia”, press right key to enter ““Messages”. Move the cursor up/down; Up/down Move the cursor up/down to select menu options; In idle mode, press up key to enter “STK Services”, press down key to enter “Phone Book List”.
Page 21
錯誤! 尚未定義樣式。 In idle mode, hold * key to .quickly enter or quit “Meeting” mode; * key In text input mode, press * key to switch the input method. In idle mode, hold # key to lock the keypad; # key In text input mode, press # key to display the symbol box.
Descriptions of icons on touch-screen Click this icon to return to idle mode from current interface. In idle mode, click this icon to enter “Messages”. In idle mode, click this icon to enter “Phone Book”. In idle mode, click this icon to enter the dialing interface. 1.5 Battery 1.5.1 Installing the Battery 1.
錯誤! 尚未定義樣式。 1.5.2 Removing the Battery 1. Push down the battery back 2. Pull the battery in the direction and take out the back cover; of the arrow as shown and take out the battery. Note: Please turn off your mobile phone before taking out the battery. 1.5.3 Charging the Battery The lithium battery can be used directly after being taken out from the package.
Page 24
3. When the mobile phone is powered on, the battery capacity bar on up-right corner of the screen keeps scrolling during charging; when the mobile phone is powered off, there will be charging indication on the screen during charging. If the mobile phone is used excessively without enough capability, the charging indication will not immediately appear on the screen of the mobile phone when charging starts, and the mobile phone might not be powered on within a few minutes after...
錯誤! 尚未定義樣式。 1.6 Insert and Remove SIM Card Insert a valid SIM card into your mobile phone before use. All information regarding network connection and SIM phone book is saved in SIM card. In order to avoid the loss and damage of information saved in SIM card, please don’t touch the metal surface and put SIM card far away from electricity or magnetism.
Page 26
1. Turn off your phone, remove the battery and disconnect the external power; 2. Open the clasp in the direction of arrow as shown; 3. Insert the memory card into the slot; 4. Close the clasp;...
錯誤! 尚未定義樣式。 5. Secure the clasp in the direction of arrow as shown; 6. Turn off your phone and remove the battery before taking out the memory card. 1.8 Power On/Off Hold End key until the power-on/off animation appears. After your turn on your mobile phone, it will automatically check whether or not SIM card is inserted or usable, and shows the following information on the screen in turn: Enter Phone Lock Code: if you’ve set the code.
Page 28
Enter PIN: if you’ve set PIN code for SIM card. Note: SIM card will be locked if you enter wrong PIN code three times. Then you need PUK code to unlock SIM card. The PIN code may be provided to you together with SIM card. If not, contact your network service provider.
錯誤! 尚未定義樣式。 Making and Receiving Call 2.1 Making Calls 2.1.1 Direct Dial Using keyboard In idle mode, press numeric keys to input the phone number and press Send key to dial. Using touch-pen In idle mode, use touch-pen to click any blank space on the screen to display the dialing keyboard, click the numeric keys to input the number, and click to dial.
Using touch-pen 1. In idle mode, use touch-pen to click any blank space on the screen to display the dialing keyboard; 2. Click to enter “Phone Book List” to select the contact you want to dial; 3. If the contact has one number, click to make a call directly;...
錯誤! 尚未定義樣式。 2.1.5 Dial International Calls To dial an international call, press * key or click until “+” appears on the screen. This will enable you to dial an international call at anywhere even without knowing the international prefix. 2.1.6 IP Dial 1.
Use headset to answer If the headset is connected, you can press the key on the headset to answer the call. 2.4 Adjust the Volume 1. During the conversation, press Side key to adjust the voice volume; 2. In idle mode, press Side key to adjust the key volume. 2.5 Hands-free 1.
Page 33
錯誤! 尚未定義樣式。 New Call Enter new dialing interface. Phone Book Enter phone book. Message Enter “Message”. The MMS function will be disabled during the conversation due to the restriction of network occupancy. Sound Recorder Record the current talk. Mute Turn ON/OFF. When mute is on, the other party can’t hear your voice. DTMF Turn ON/OFF.
Page 34
End All: To end all active calls. Note: The menu option marked with “*” appears only under specific conditions. Conference function requires network support.
錯誤! 尚未定義樣式。 Call History Missed Calls, Dialed Calls and Received Calls are saved in “Call History”. If the records are full, the earliest saved records will be deleted. 3.1 View 1. Select “All Calls”, “Missed Calls”, “Dialed Calls” or “Received Calls”;...
2. Select “Missed Calls”, “Dialed Calls”, “Received Calls” or “Delete All”. 3.3 Call Time You could select “Last Call Time”, “Total Sent”, “Total Received” or “Reset All Time”.
錯誤! 尚未定義樣式。 STK Intelligent Service STK card services are value-added services provided by your network provider. Your mobile phone supports STK card services. If SIM card and your network provider do not support the service, this function can’t be used.
Entertainment 5.1 Games Your mobile phone provides built-in games. Enter the menu and view the operation descriptions. 5.2 Melody Compose You could compose your favorable music as the ringtone for incoming call and alarm. Your mobile phone could save up to 5 composed ringtones, and each ringtone could contain a maximum of 150 notes.
Page 39
錯誤! 尚未定義樣式。 Rules of composing ringtone Keys Descriptions Keys Descriptions Insert Do, Re, Me, Fa, Insert a rest So, La, Si Insert background Insert a vibrate note light Make current note raise Change the bar length fall semitone, of current note restore to normal.
Multimedia 6.1 File Manager Enter “File Manager” to display “Phone” and “Memory Card”. The Total and Free memory space will be displayed on the upper part of the interface. Press “Option” to select: Open: list the directories and files under root directory. Create Folder: create a new folder and edit the folder name.
錯誤! 尚未定義樣式。 Rename: change the name of the file. Copy: select “Keep Original File” or “Delete Original File” when copying. Delete: delete the file. Delete All: delete all files under the current folder. Sort: select “By Name”, “By Type”, “By Time”, “By Size” or “None”...
Restore Default: restore to factory default settings. 2. Press OK key to take photos after the above settings: On the preview interface, you could perform the following operations with the touch-pen: Click to adjust EV parameters; Click to adjust the camera focus; Click to change effect settings;...
Page 43
錯誤! 尚未定義樣式。 Pre. Play List: select the file from “Phone” or “Memory Card”. List Auto Gen: when selecting “On”, you could automatically add the files saved in My Music of Phone or Memory Card into the play list. when selecting “Off”, you could press “Option” “Add"...
You could also perform the operations using the touch-pen: Click to play. Click to pause. Click to stop playing. Click to adjust the volume. Click to play the next file; click to play the previous one. Click to change repeat mode. Click to change random mode.
錯誤! 尚未定義樣式。 Delete: delete the current file. Delete All: delete all files. Settings: set “Pref. Storage” and “File Format”. Forward: forward the selected file “To User Profile”, “To MMS”. 6.5 FM Radio Channel List: edit up to 9 channels. Manual Input: manually input a channel. Preset Auto Search: automatically search for channels.
Page 46
Browse Style: select “List Mode” or “Matrix Mode”. Forward: select “To Wallpaper”, “To Screen Saver”, “To Caller Image”, “To MMS” (Whether it can be sent or not depends on MMS space and screen size). Rename Delete Delete All Sort: select “By Name”, “By Type”, “By Time”, “By Size” or “None”.
錯誤! 尚未定義樣式。 Phone Book In phone book, you could save the contact’s name, telephone number, mobile phone number, etc. The numbers could be saved either in Phone or SIM card. 7.1 Phone Book List Press the corresponding numeric key of the contact’s name or use touch-pen to click the corresponding letter on the screen to quickly search for the contacts.
“Number”. If you want to add a new entry into Phone, besides “Name”, “Number”, “Home Number”, “Office Number”, “Other Number”, “Email Address”, “Memo”, and you could also edit the following: Caller Group: add the phone number into different caller groups. Associate Picture: set your personalized caller picture for the current number.
錯誤! 尚未定義樣式。 7.5 Copy All Select “From SIM” to copy all entries from SIM card to Phone, or select “From Phone” to copy all entries from Phone to SIM card. Note: When copying all entries from Phone to SIM card, only the name and number will be copied.
Page 50
Note: Any changes arising from the use of this function will not affect the actual numbers saved in SIM card. Memory Status You could check the memory status of both phone and SIM.
錯誤! 尚未定義樣式。 Messages 8.1 SMS Your phone supports Enhanced Message Service (EMS), which allows you to insert picture, animation, cantus, sound, etc, or use template to create short message. 如果短信已满,发送并保存新短信时能够发送成功,但是不保存短信。如果 需要保存最新发送的短信,则需要手动删除一些旧短信。 8.1.1 Write Message 1. Enter “Write Message” to edit a short message; 2.
will be saved in “Outbox” after it was sent. Save as Draft: save the message in “Inbox”. Exit Note: SMS centers of some cities and regions do not support a short message containing more than 70 Chinese characters (or 160 English letters).
錯誤! 尚未定義樣式。 Copy to Phone/SIM: copy this message to Phone or SIM card. Copy All: copy all messages from SIM/Phone to Phone/SIM. 8.1.3 Outbox 1. Enter “Outbox” to view the messages; 2. Press Up/Down key to select the message, and press “Option” to select “View”, “Edit”, “Send”, “Delete”, “Get Number”, “Copy to Phone/SIM”, or “Delete All”.
8.1.7 Settings Before using Messages, you need perform relevant settings. Enter “Settings” to select: Profile Setting Please contact your local network provider to obtain the service center number. Enter “Profile Settings” and select one profile. Select “Edit” to set “Profile Name”, “SC Address”, “Valid Period”...
錯誤! 尚未定義樣式。 Preferred Storage You could select “SIM” or “Phone” as the default storage media for SMS. 8.1.8 SMS Counter You could view the number of messages “sent” and “received”. 8.2 MMS MMS indicates Multimedia Messaging Service, which features in the multimedia function and enables users to send messages that include multimedia objects (text, images, audios, etc.).
To: you could select “Add Number” or “Add Email”. Cc: If the network supports, you could add more recipients. The operation is the same as “To”. Bcc: If the network supports, you could add more blind recipients. The operation is the same as “To”. Subject: the subject could be null.
錯誤! 尚未定義樣式。 Forward: forward the current MMS. Delete: delete the current MMS. Delete All: Properties: view the details of MMS. Get Number: get the sender’s number and the number in current message to dial or save. Note: When you check MMS with music, the side key can’t be used to adjust the volume.
8.2.5 Template Your phone stores 5 predefined multimedia messages. Press “Option” to select “View”, “Write Message” or “Properties”. 8.2.6 Message Settings Before using MMS, you must perform some necessary settings. Compose You could set “Creation Mode”, “Image Resizing” and “Auto Signature”. Send You could set “Validity period”, “Delivery report”, “Read report”, “Priority”, “Slide Timing”...
錯誤! 尚未定義樣式。 Memory Status You could check the memory status. Note: The use of “Delivery Report” and “Anonymous” depends on your network service provided by your provider. For more details, please consult your network provider. Your mobile phone has reserved some usable space to save MMS. It may fully occupy the space if you store a lot of multimedia messages.
Extra 9.1 Calendar Enter “Calendar”, the calendar in current month will be displayed on the screen and the current date will be marked by a background box in special color. You could press navigation keys or click the direction arrows on the screen to browse the dates and the information on the screen will also change consequently.
錯誤! 尚未定義樣式。 2. Set “Off/On”, “Time”, “Repeat”, “Snooze”, “Audio Options” and then press “Option” to select “Save”. 9.4 Calculator Your mobile phone provides a calculator to perform simple calculations. You could add, subtract, multiply or divide, and select M+, M-, MR, and MC to perform relevant operations.
9.5 Stopwatch 9.5.1 Typical Stopwatch You could select “Spit Timing”, “Lap Timing” or “View record”. 9.5.2 nWay Stopwatch Press 4 different navigation keys to record the different timing respectively. Note: Press left soft key to stop time measuring, and hold left soft key to clear up all the data.
錯誤! 尚未定義樣式。 9.8 Currency Converter Your mobile phone provides you with currency converter to convert the currency. Input the ratio, then the local currency value, and press left soft key “OK” to display the result. 9.9 Health Select “Male” or “Female”, input the value under “Height” and “Weight”, and press “OK”...
Browser 10.1 WAP Browser Your mobile phone supports Wireless Application Protocol (WAP). You could get access to the services provided by your network provider. It allows you to get information about news, weather forecast, airline flights, etc. These services are especially designed for the mobile phone, and they are maintained by WAP provider.
Page 65
錯誤! 尚未定義樣式。 select “Goto”, “Edit”, “Send”, “Delete”, “Delete All” or “Add Bookmark”. Note: Before use, please make sure your bookmark list is not empty. In order to avoid this, a few common websites have been preset to you in your mobile phone. Recent Pages Display the recent pages you’ve visited.
10.2 Data Account 10.2.1 GSM Data In “GSM Data”, the list of data accounts is displayed. Select one account, press “Edit” to edit the following items: Account Name: edit the account name. Number: edit the connection number of current account. User Name: edit the user name for dial server (not WAP gateway).
錯誤! 尚未定義樣式。 10.3 GPRS Counter Last Sent: record the bytes sent last time. Last Received: record the bytes received last time. All Sent: record all bytes sent. All Received: record all bytes received. Reset Counter: start counting again.
Settings 11.1 Pen Calibration As you feel your phone doesn’t react properly after you use the touch-pen to click relevant option or icon, you need calibrate the touch screen. Click with the touch-pen until the calibration is completed. If the calibration is still not accurate as you make sure to click the center every time, you should refer to 11.7 Restore Factory Settings.
錯誤! 尚未定義樣式。 In idle mode, hold * key to activate “Meeting”. 11.3 Phone Setup 11.3.1 Display Characteristic You could set “Wallpaper”, “Date”, “Time” and “MainkeyIcons”. 11.3.2 Key Vibrate You could turn on/off this function. 11.3.3 LCD Backlight You could set the duration and brightness for LCD backlight. 11.3.4 Time and Date You could set “Date”, “Time”, “Date Format”...
11.3.6 Auto Lock Keypad You could prevent misoperation resulting from improper key press. In idle mode, press # key to lock the keypad. Unlock the keypad: press left soft key and # key. 11.3.7 Power Saving Mode You could turn on/off power saving mode. 11.3.8 Language You could set the language as “Spanish”...
錯誤! 尚未定義樣式。 number. Note: This function requires network support, so please contact your network provider for details. You could select “Divert All Voice Calls”, “Divert If Busy”, ”Divert If No Answer”, “Divert If Unreachable”, “Divert All Data Calls” or “Fax Calls”. If you don’t need to divert, you could select “Cancel All Divert”.
11.4.5 Black List You could edit the Black List. After you select “On” under Mode, the incoming call from the numbers in the Black List will be rejected. 11.4.6 Auto Redial You could turn on/off this function. If the other party doesn’t answer the call as you select “On”, your mobile phone will automatically redial after a while.
錯誤! 尚未定義樣式。 11.5.2 GPRS Connection Press left soft key “Change” to switch between “When Needed” and “Always”. 11.6 Security Setup You could perform the following settings to avoid illegal use of your phone and SIM card. You need to input password to enter “Security Setup”. The default password is 0000.
soon as possible. 11.6.2 Phone Lock Phone Lock could prevent your mobile phone against illegal use. Select “Power On” to input the password. You need input correct password to unlock your mobile phone as you turn on your mobile phone next time. Select “Changing SIM”...
錯誤! 尚未定義樣式。 Fixed Dial List Edit a maximum of 10 fixed dial numbers. Note: You need input PIN2 code to turn on/off fixed dial function. Please contact your network provider to get PIN2 code. After fixed dial is activated, only the entries you set in Fixed Dial List will be displayed in phone book.
Cancel All: input the password to cancel all call barring. Change Barring PW: Input the old password and set new one. 11.6.5 Change Password You could change “PIN”, “PIN2” and “Phone Lock Password”. Note: The length of password must be more than 4 digits and less than 8 digits.
錯誤! 尚未定義樣式。 Input Methods 12.1 General Description Your mobile phone supports keypad input and handwriting input. The input methods include English Letter Input (uppercase/lowercase), Smart English Input (uppercase/lowercase), Smart Spanish Input (uppercase/lowercase), Number Input and Symbol Input. 12.2 Keypad Definitions/Icon Descriptions Keypad Definitions Left Soft Key Generally used to confirm.
Smart Spanish Smart Spanish uppercase input uppercase input eZi es eZi ES method method Smart English Smart English small uppercase input case input method English uppercase English lowercase input method input method Number input method 12.3 Descriptions of Input Methods 12.3.1 Handwriting Input Method Adopting advanced character recognition technology, your mobile phone supports the handwriting of number, and English characters.
錯誤! 尚未定義樣式。 12.3.2 Spanish Input Method Use Touch-pen 1. Click the corresponding letters to input your desired word; 2. Click the screen to move the cursor; 3. Click to input space; 4. Click to delete the last input; 5. Click to switch between capital and small letter;...
12.3.3 English Letter Input Method Use Touch-pen 1. Click the corresponding letters to input your desired word; 2. Click the screen to move the cursor; 3. Click to input space; 4. Click to delete the last input; 5. Click to switch between capital and small letter; 6.
錯誤! 尚未定義樣式。 12.3.4 Smart English Input Method Use Touch-pen 1. Click the corresponding letters to input your desired word; 2. Click the screen to move the cursor; 3. Click to input space; 4. Click to delete the last input; 5. Click to switch between capital and small letter;...
12.3.5 Number Input Method Use Touch-pen 1. Click the corresponding numbers on the screen to input your desired numbers; 2. Click to input space; 3. Click to go to next line; 4. Click to delete the input number; 5. Click to open the virtual keypad;...
Page 83
錯誤! 尚未定義樣式。 Use Keypad Press # key to enter the list of symbols, select your desired symbol through the navigation keys, and then press OK to confirm.
Appendix 13.1 Clearance and Maintenance Please maintain your mobile phone with good care since it is delicately designed and manufactured. The following advice might help you extend the life of your mobile phone. Clean your mobile phone, battery and charger with a soft dry cloth. Do not clean your mobile phone with the liquor such as alcohol, dilution agent or benzene.
Page 85
錯誤! 尚未定義樣式。 phone. Don’t use and put your mobile phone in a dusty or dirty environment because this might damage the phone components. Don’t keep your mobile phone near high-temperature because it might shorten the life of electronic devices, damage the battery, twist or melt some plastic parts.
13.2 Failure Analysis Symptoms Possible Causes Solutions Inadequate battery Charge the battery capacity Unable to turn on the phone Poor contact Reinstall the battery Automatic Seriously poor battery Recharge the battery capacity power-off Deceasing of battery Replace the battery performance Inadequate standby time Turn off the phone as...
photo is too big . FCC Regulations: This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 88
錯誤! 尚未定義樣式。 -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
Page 89
4RF Exposure Information (SAR) This model phone meets the government’s requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR.
Page 90
錯誤! 尚未定義樣式。 While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.