Field Setting - Daikin FCQ71DV3B Installation Manual

10. FIELD SETTING

Make sure the terminal box lids are closed on the indoor and outdoor units.
Field setting must be made from the remote controller and in accordance with installation conditions.
• Setting can be made by changing the "Mode No", "FIRST CODE NO." and "SECOND CODE NO.".
• For setting procedures and instructions, see "Field settings" provided with the remote controller.
10-1 Setting ceiling height
• Select the SECOND CODE NO. that corresponds to the ceiling height "Table 5".
(SECOND CODE NO. is factory set to "01" for a ceiling height of less than 2.7m .)
Table 5
Ceiling height (m)
FCQ71 FCQ100·125·140
Less than 2.7 m Less than 3.2m
More than 2.7 m; More than 3.2m;
3.0 m or less
More than 3.0 m; More than 3.6m;
3.5 m or less
See the installation manual included with the sealing material of air discharge outlet kit, sold separately and
technical guide, for ceiling height settings for two and three-direction air discharge.
10-2 Setting when installing high performance filters
• In case of installing high performance filters, refer to the option handbook of the high performance filters.
10-3 Setting air filter sign
• Remote controllers are equiped with liquid crystal display air filter signs to display the time to clean air filters.
• Change the SECOND CODE NO. according to "Table 6" depending on the amount of dirt or dust in the
room.
(SECOND CODE NO. is factory set to "01" for filter contamination-light.)
Table 6
Setting
Air filter contamination-
light
Air filter contamination-
heavy
10-4 Setting indoor unit number of simultaneous operation system
• When using in simultaneous operation system mode, change the SECOND CODE NO. as shown in "Table 7".
(SECOND CODE NO. is factory set to "01" for Number Pair system.)
Table 7
Setting
Pair system (1 unit)
Simultaneous operation system
(2-unit)
• When using in simultaneous operation system mode, refer to "10-5 Simultaneous operation system indi-
vidual setting" on page 20 section to set master and slave units separately.
English
N
H
3.6m or less
S
4.2m or less
Spacing time of display air filter
sign (long life type)
Approx. 5000 hrs
Approx. 2500 hrs
Mode No. *
11 (21)
Mode No. * FIRST CODE NO. SECOND CODE NO.
13 (23)
Mode No. *
10 (20)
FIRST CODE NO.
0
01
0
02
03
FIRST CODE SECOND
NO. CODE NO.
01
0
02
SECOND CODE NO.
01
02
19