Technical Specification - Beko DC 1670 Manual

Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 50
To clean the condenser:
1. If a drying process has been carried out,
open the door of the product and wait until
it cools down.
2. Unlock the 4 condenser locks after
opening the kick plate.
3. Pull out the condenser.
4. Clean the condenser with pressurized
water and wait until the water drains.
5. Replace the condenser with the side of it
labelled with "Top" facing upwards. Lock
the 4 condenser locks. Make sure that
the red lock on the upper right corner is
engaged securely.
6. Close the kick plate cover.
Close properly and
check the locking
latchs?

Technical specification

EN
Height (adjustable)
Width
Depth
Capacity (max.)
Weight (net)
Voltage
Rated power input
Model code
Type label is located behind the loading door.
2
63 EN
85.0 cm
59.5 cm
54 cm
7 kg
37 kg
See type label

Advertisement

Table of Contents
loading

Table of Contents