Table of Contents
Advertisement
The PLU setting screen (grid type) can display a maximum of 1000 PLUs at the same time. Therefore,
in case you have more than 1000 PLUs, click [Next PLU BLOCK] to display next block of 1000 PLUs.
When you click [Next PLU BLOCK], the save message for the setting you did at the currently displayed
screen will appear. Save the settings when necessary. Also if you created new PLU data, the following
PLU menu assignment screen will appear. Make necessary settings referring below. After the
operation has completed, the next block is displayed.
If you create new data, the following window will appear when you save the data for specifying PLU
Menu for the PLU code(s) you newly created. When you want the codes belong to PLU Menu(s), click
the corresponding menu column(s). The circle will appear when selected.
NOTE
• For PLU Menu function, please refer to POS Terminal manual.
• You can edit PLU Menu assignment setting at the Menu Setting at PLU Programming of Product
module.
72
Advertisement
Table of Contents
