Upload Data From Terminal - Sharp UP-X300 Instruction Manual

Upload Data from Terminal

Selecting Upload Data from Terminal from Data Control allows you to load programming data from
several terminals to the Back Office.
When you select Upload Data from Terminal, a terminal selection window will open. Select a terminal or
several POS terminals, and click [UPLOAD] key. The confirmation window asking if you want to
overwrite Back Office programming data will open. Select [Yes] or [No]. When you select [Yes], an
upload operation is executed.
CAUTION
The programming data stored in terminals is a part of back office programming data. Therefore you
may only restore the part of programming data.
26