Table of Contents
Advertisement
Card type editor
If the selected option is not a record type, card type editor will open.
To display a card type editor window, double-click the No. column in the grid type editor.
When arrows appear at the tab area it means there are more programming items.
1.
Click a target tab, its programming items will appear.
2.
Set parameters. Please refer to "For the parameter settings" described later.
3.
Repeat the steps 1 and 2 for the tabs you want to set.
4.
Click [OK] to complete settings. When the module has the grid type editor, the machine returns to
the editor. When not, the machine shows the confirmation window to ask you if you save the
change. Click [YES] to save, [NO] to cancel new settings, or [CANCEL] to return to the setting
window returns to the command selection window.
To cancel setting, click [CANCEL].
To view or print the programming setting, click [View] or [Print]. For more information about
viewing/printing programming setting, please refer to the "Viewing/Printing programming settings"
section.
NOTE
In this manual, tab names are indicated at the columns of Category in the programming lists.
32
Tab
Programming item information
Advertisement
Table of Contents
