Sharp UP-X300 Instruction Manual page 255

Programming for each physical device
Device
TCP/IP (for all TCP/IP
connection)
RS232 (for all RS232
connection)
Directory (for all file base
connection)
KVM: Logwood
Printer (including KP)
Kitchen Printer
EFT Datatran
Pin Pad
Account Balance (Online)
254
Parameters
Port number
Baud rate (2400 - 115200)
(2400 / 4800 / 9600 / 19200 / 28800 / 38400 / 57600 / 115200)
Bit Format (7 / 8)
Parity (Odd / Even / None)
Stop Bit (1 / 1.5 / 2)
Flow Control (None / DTR-DSR / RTS-CTS / Xon-Xoff)
Shared directory (128 character)
Order Start Text (8 characters)
Open Info Text (50 characters)
Auto cutter using (Yes / No)
Read Timeout (Second) (1 - 255)
Write Timeout (Second) (1 - 255)
Counter per Printer (8 digits Integer)
(This is programming for each physical printer device.)
Printer Name (12 characters)
Language (first, second, bitmap)
Foreign language font (font image file for target printer)
TIME OUT timer for ACK/NAK (Second) (1 - 255)
TIME OUT timer for Response of Authorization (Second) (1 - 255)
TIME OUT timer for BATCH CLOSE (Second) (1 - 3000)
PHONE NUMBER for DIAL OUT (0 to 9, W, comma)
PASSWORD for DIAL OUT
DIAL MODE for DIAL OUT (Pulse / Tone)
GIFT RELOAD COMMAND to DataTran ("AT&UM20" / "AT&UM8")
REF# and AP CODE entry at Gift Sales in VOID
(COMPULSORY / NOT)
Sending AT&UI6 command to Data Tran CAT (NO / YES)
Gift Card Sales command for DataTran ("AT&UM5" / "AT&UM4")
FTS MODE (Enable / Disable)
TIME OUT timer for ACK/NAK (Second) (1 - 255)
TIME OUT timer for response of Authorization (Second) (1 - 255)
TIME OUT timer for ACK/NAK (Second) (1 - 255)
TIME OUT timer for response of Authorization (Second) (1 - 255)