Bridging
To answer a bridged
call
To prevent other
bridged voice terminals
from entering a call (on
a per-call basis)
Call Coverage
To answer a call for a
co-worker for whom
you are a coverage
point
To leave a message
telling a co-worker to
call the original caller's
extension
To talk privately with a
co-worker after
answering a redirected
call
1
Press
of bridged call
xxxxx
Note: If your voice terminal has Ringing Appearance
Preference, this step is not necessary; you will
automatically be connected to the call when you lift the
handset.
2 Pick up handset
1 Press
while connected to the call
Exclusion xxxxx
Note: Pressing
Exclusion xxxxx
1 Press
of incoming call when ring begins or green
xxxxx
light flashes
Note: The call is not at your voice terminal until the
light is flashing.
1 Press
Coverage Callback
Note: To leave a message telling a co-worker to call
you, activate Leave Word Calling instead.
1 Press
or
Transfer
Conference-Ring
Call is temporarily put on hold
2 Press
Consult
or dial co-worker's extension
again reactivates bridging.
while connected to the call
[confirmation tone]
[dial tone]
[priority ring to co-worker]
[single-burst ring to co-worker]
14