Automatic Callback; Bridging/Manual Exclusion; Call Coverage/Consult - AT&T Generic 3 Quick Reference Manual

List 2
List 3
Note: An [
Dial desired list item (1, 2, 3...).
2

AUTOMATIC CALLBACK

To automatically place another call to an extension
that was busy, or did not answer
1 During call attempt, press softkey below AutCB
(if shown on the display)
or Press [
2 Hang up.
You hear a 3-burst priority ring when both you
and the called extension are idle.
3 Pick up handset to be connected to call.
To cancel Automatic Callback
1
While on-hook, press softkey below AutCB again
or Press [

BRIDGING/MANUAL EXCLUSION

To answer a bridged call
1 Press [
or press [
NOTE: If your terminal has Ringing Appearance
Preference, just lift the handset or press [
To prevent other bridged terminals from entering a
call (on a per call basis)
1 Press the softkey below Excl while active on a call
or Press [
NOTE: Pressing the softkey below Excl or
pressing [

CALL COVERAGE/CONSULT

To answer a call for a coworker for whom you are
a coverage point
1 Press [
green light flashes.
Enhcd List
AutoCallBk
AutoCallBk
] of bridged call and lift handset
xxxxx
].
Speaker
] while connected to the call.
Excl xxxxx
Excl xxxxx
] of incoming call when ring begins or
xxxxx
] may also be available.
].
] again.
] again reactivates bridging.
3
].
Speaker