Reset Speakerphone - AT&T 7406 Plus User Manual

Voice terminal
Hide thumbs Also See for 7406 Plus:
Table of Contents

Advertisement

Reset Speakerphone

Note: If you are uncertain whether your voice terminal is set for Speaker (listen only)
or Speakerphone (listen and talk), check with your System Manager. Use the
following procedures if your voice terminal is set for the Speakerphone (listen and
speak feature).
Note: When used with
surrounding acoustical environment to provide optimal speakerphone performance.
Use the Reset Speakerphone feature when you move your voice terminal to a different
location (even in the same room), when the terminal is unplugged, or when there has
been a power failure. If any of these things happen, the light on this button will
flutter to notify you that the sound level and quality needs to be reset. If you find the
green light next to
 Speaker-Reset Spkr 
terminal may have lost power (for example, by being unplugged or due to a power
failure). In this case, you will need to readjust the speakerphone's sound level and
quality again.
You can initiate the Reset Speakerphone feature when your handset is on-hook, or
during a call in which you are using the built-in speakerphone in the unlikely event
that your speakerphone makes a squealing noise. If a call is in progress, you will not
hear the tones, and the sound quality is reset only for the duration of that call. Reset
Speakerphone should be used again after hanging up from the call.
To adjust the
speakerphone's sound
quality to the room
acoustics
the built-in speakerphone performs a test of the
 -Select ,
fluttering when you return to your office, the voice
Ensure that the front of the voice terminal is not
blocked in any way and that the voice terminal is on a
flat smooth surface
2 Press
 -Select 
Green light next to
3 Press
 Speaker-Reset Spkr 
Green light next to
Green light next to
intermittently
You hear a series of tones as the speakerphone
performs an acoustic test of the environment. When
the tones stop, your built-in speakerphone is ready
for use.
goes on steadily
 -Select ,
goes off
 -Select ,
flutters
 Speaker-Reset Spkr 
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents