Setting Up A Repeater Unit - NETGEAR RANGEMAX WNR3500 User Manual

NETGEAR RangeMax™ Wireless-N Gigabit Router WNR3500 User Manual
2. From the main menu of the browser interface on the wireless router base unit, under
Advanced, click Wireless Repeating Function to display the Wireless Repeating Function
screen.
Figure 4-8
3. Select the Enable Wireless Repeating Function check box and the Wireless Base Station
radio button.
4. Enter the MAC address for the repeater units.
5. Click Apply to save your changes.

Setting Up a Repeater Unit

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
Note: If you are using the WNR3500 router base station with a different model wireless
router as the repeater, you might need to change additional configuration settings.
In particular, you should disable the DHCP server function on the wireless
repeater AP.
4-14
v1.0, March 2008
Customizing Your Network Settings