Configuring Static Routes - NETGEAR MR814v2 Reference Manual

Reference Manual for the MR814v2 Cable/DSL Wireless Router
If your dynamic DNS provider allows the use of wildcards in resolving your URL, you may
7.
select the Use wildcards check box to activate this feature.
For example, the wildcard feature will cause *.yourhost.dyndns.org to be aliased to the same
IP address as yourhost.dyndns.org
Click Apply to save your configuration.
8.

Configuring Static Routes

Static Routes provide additional routing information to your router. Under normal circumstances,
the router has adequate routing information after it has been configured for Internet access, and
you do not need to configure additional static routes. You must configure static routes only for
unusual cases such as multiple routers or multiple IP subnets located on your network.
From the Main Menu of the browser interface, under Advanced, click on Static Routes to view the
Static Route menu, shown below.
Figure 6-4. Static Route Summary Table
To add or edit a Static Route:
6-10 Advanced Configuration of the Router