How To Restrict Wireless Access By Mac Address - NETGEAR MR814v2 Reference Manual

Note: If you are configuring the firewall from a wireless PC and you change the
firewall's SSID, channel, or security settings, you will lose your wireless connection
when you click on Apply. You must then change the wireless settings of your PC to
match the firewall's new settings.
Configure and test your PCs for wireless connectivity.
8.
Program the wireless adapter of your PCs to have the same SSID and channel that you
configured in the router. Check that they have a wireless link and are able to obtain an IP
address by DHCP from the firewall.
Once your PCs have basic wireless connectivity to the firewall, then you can configure the
advanced wireless security functions of the firewall.

How to Restrict Wireless Access by MAC Address

To restrict access based on MAC addresses, follow these steps:
Log in to the MR814v2 firewall at its default LAN address of
1.
default user name of admin and default password of password, or using whatever LAN
address and password you have set up.
Click the Wireless Settings link in the main menu of the MR814v2 firewall.
2.
From the Wireless Settings menu, click the Setup Access List button to display the Wireless
3.
Access menu shown below.
Figure 3-10. Wireless Access menu
Wireless Configuration
Reference Manual for the MR814v2 Cable/DSL Wireless Router
http://192.168.0.1 with its
3-9