The Router's Rear Panel - NETGEAR MR814v2 Reference Manual

Table 1-1. LED Descriptions
On
Wireless
On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off
Local

The Router's Rear Panel

The rear panel of the Model RP614 router contains the port connections listed below.
Figure 1-2: MR814v2 Rear Panel
Viewed from left to right, the rear panel contains the following features:
• AC power adapter outlet
• Four Local (LAN) Ethernet ports for connecting the router to the local PCs
• Internet (WAN) Ethernet port for connecting the router to a cable or DSL modem
• Factory Default Reset push button
• Wireless antenna
Introduction
Reference Manual for the MR814v2 Cable/DSL Wireless Router
Indicates that the Wireless port is initialized.
The Local (LAN) port has detected link with a 100 Mbps device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
1-7