NETGEAR MR814v2 Reference Manual page 58

Reference Manual for the MR814v2 Cable/DSL Wireless Router
This screen shows the following parameters:
Table 5-1. Router Status Fields
Field
Account Name
Firmware Version
Internet Port
MAC Address
IP Address
IP Subnet Mask
DHCP
LAN Port
MAC Address
IP Address
IP Subnet Mask
DHCP
Wireless Port
MAC Address
Name (SSID)
Region
Channel
5-2
Description
This field displays the Host Name assigned to the router.
This field displays the router firmware version.
These parameters apply to the Internet (WAN) port of the router.
This field displays the Media Access Control address being used by the
Internet (WAN) port of the router.
This field displays the IP address being used by the Internet (WAN) port
of the router. If no address is shown, the router cannot connect to the
Internet.
This field displays the IP Subnet Mask being used by the Internet (WAN)
port of the router.
If set to None, the router is configured to use a fixed IP address on the
WAN.
If set to Client, the router is configured to obtain an IP address
dynamically from the ISP.
These parameters apply to the Local (WAN) port of the router.
This field displays the Media Access Control address being used by the
LAN port of the router.
This field displays the IP address being used by the Local (LAN) port of
the router. The default is 192.168.0.1
This field displays the IP Subnet Mask being used by the Local (LAN)
port of the router. The default is 255.255.255.0
Identifies if the router's built-in DHCP server is active for the LAN
attached devices.
These parameters apply to the Wireless port of the router.
This field displays the Media Access Control address being used by the
Wireless port of the router.
This field displays the wireless network name (SSID) being used by the
wireless port of the router. The default is Wireless.
This field displays the geographic region where the router being used. It
may be illegal to use the wireless features of the router in some parts of
the world.
Identifies if the channel the wireless port is using. See
Channels" on page D-7 for the frequencies used on each channel.
"Wireless
Maintenance