Dhcp Configuration Of Tcp/Ip In Windows Xp, 2000, Or Nt4; Dhcp Configuration Of Tcp/Ip In Windows Xp - NETGEAR MR814v2 Reference Manual

Cable/dsl wireless router
Hide thumbs Also See for MR814v2:
Table of Contents

Advertisement

Reference Manual for the MR814v2 Cable/DSL Wireless Router

DHCP Configuration of TCP/IP in Windows XP, 2000, or NT4

You will find there are many similarities in the procedures for different Windows systems when
using DHCP to configure TCP/IP.
The following steps will walk you through the configuration process for each of these versions of
Windows.

DHCP Configuration of TCP/IP in Windows XP

Locate your Network Neighborhood icon.
Select Control Panel from the Windows XP new Start Menu.
Select the Network Connections icon on the Control Panel. This will take you to the next
step.
• Now the Network Connection window
displays.
The Connections List that shows all the
network connections set up on the PC,
located to the right of the window.
• Right-click on the Connection you will
use and choose Status.
C-8
Preparing Your Network

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mr814 - 802.11b cable/dsl wireless router

Table of Contents