Braun PrecisionSensor Pro BP 2590 Manual page 8

8
3. When a measuring position has been reached,
you will hear an acoustic signal and the display
shows a heart symbol. Both indicate that the
appropriate measuring position has been
reached. The measurement now starts
automatically.
4. When the measurement is complete, an acoustic
signal will sound again, and the reading is
displayed.
Upper (systolic) value
Lower (diastolic) value
Pulse
Additionally, on the upper display section, three
status boxes will appear to confirm that the
appropriate measuring position was kept during the
complete measuring process.
All three boxes have to show «OK». If the following
r
symbols (« » = too high; «
appropriate measuring position was not maintained
and the measurement has to be repeated.
Important
15 seconds after switching on the device, the
measuring process will begin automatically, even
if the appropriate measuring position has not been
reached. If at any time you want to discontinue the
measurement, press the I/0 button.
Memory
The blood pressure monitor can store up to
30 readings along with the status box information.
Readings are stored automatically after each
measurement.
w
» = too low) appear, the