How To Set: Selecting A Sender Name Upon Fax Transmission - Konica Minolta bizhub 554e Quick Start Manual

5.3 Fax
4
Select a number, then select [New].
5
Enter the sender name, then tap [OK].
6
Repeat Steps 4 and 5 to complete entry of all sender names.
% You can register up to 20 sender names.
% To edit a registered sender name, select a sender name and tap [Edit], change the sender name and
tap [OK].
% To delete a registered sender name, select the sender name and tap [Delete], select [Yes], then tap
[OK].
% To set the default sender name, select a sender name and tap [Set as Default].
Tips
- If [Administrator Settings] - [Fax Settings] - [TX/RX Settings] - [Individual Sender Line Setup] is set to
[ON] while multiple lines are used, the default sender name can be specified for each line.

How to set: Selecting a sender name upon fax transmission

1
Load the original.
2
Tap [Scan/Fax] and select a destination.
3
Tap [Application] and select [Fax Header Settings].
4
Select a sender name to print on the fax and tap [OK].
5
Press Start to start fax transmission.
bizhub 554e/454e/364e/284e/224e
5
5-21