HP PS110 Configuration And Administration Manual page 60

The RADIUS server configuration includes the following settings:
Primary RADIUS Server
Enter the IPv4 address for the primary RADIUS server that the router uses by default, for
example 192.168.1.23.
RADIUS Key
The RADIUS key is the shared secret key for the RADIUS server. You can use up to 64
alphanumeric and special characters (do not use characters ` " & ' # \). Do not use blank
spaces in the key. The key is case-sensitive, and you must configure the same key on the router
and on the RADIUS server.
Secondary RADIUS Server
Enter the IPv4 address for a backup RADIUS server. If authentication fails with the primary
server, the configured backup server is tried instead. If a secondary RADIUS server is
configured, be sure to enter the RADIUS key.
Accounting Enable
Select this option to track and measure the resources a particular user has consumed, such as
system time, amount of data transmitted and received, and so on. If you enable RADIUS
accounting, it is enabled for the primary and secondary RADIUS servers.
Interim Interval
The interval between transmitting accounting updates to the RADIUS server. The valid range is
30 to 3600 seconds and the default is 300 seconds.
60 Wireless configuration