Dhcpv6 - HP PS110 Configuration And Administration Manual

•
Auto Configuration: Select Stateless (RADVD) or Stateful (DHCPv6).
•
Lifetime: The time that the IPv6 address assignment is valid.

DHCPv6

Dynamic Host Configuration Protocol version 6 (DHCPv6) automatically assigns IPv6 settings to
hosts in an IPv6 network. A dynamic connection type is the most common connection method
used by ISPs with cable/DSL modems. If your ISP supports a DHCPv6 server and recommends
using this option, select DHCPv6 from the Connections Settings list.
This page includes the following settings:
Connection Settings
Sets basic IPv6 address configuration settings.
•
IPv6 Connection: Select DHCPv6 for the IPv6 address connection mode.
DNS Settings
Configures IPv6 DNS settings:
•
Obtain IPv6 DNS servers automatically: Sets the IPv6 addresses for primary and
secondary DNS servers automatically.
•
Use the following IPv6 DNS servers: Enter the primary and secondary DNS server
IPv6 addresses.
•
Disable: Disables the automatic assignment of IPv6 addresses to local hosts.
•
Stateless (RADVD): Enables the automatic assignment of IPv6 addresses by hosts on
the local network. The network portion of the address is based on prefixes received in
IPv6 router advertisement messages, and the host portion is automatically generated
using the modified EUI-64 form of the client identifier (that is, the client MAC address).
•
Stateful (DHCPv6): Enables DHCPv6 automatic assignment of IPv6 addresses to
local hosts based on a defined address pool. Enter the start and end of the address
range to define the pool.
IPv6 settings 105