Bosch Plena Operating Manual page 190

190 en | Appendices
Clause / Requirement
a the number of this European
b the name or trademark of the
c the type number or other
It shall be possible to identify a code or
number that identifies the production
period of the VACIE at access level 1 or
2 or 3.
Where Annex ZA.3 covers the same
requirements as this clause, the
requirements of this clause are met.
16 Tests
Clause / Requirement
2013.07 | V2.0 |
Standard;
manufacturer or supplier;
designation of the VACIE.
Installation and Operation manual
Compliance
Marking the Plena Voice Alarm
System with the number of this
European standard (which is legible
at access level 1) is the
responsibility of the installer, since
the installer will have to install and
configure the system properly in
order to let the installation comply
with this standard.
The name 'Bosch ' is visible on each
element of the Plena Voice Alarm
System. It is the responsibility of the
installer to ensure that this name is
legible at access level 1 for all
system elements.
The type number of each unit of the
Plena Voice Alarm System is present
on the unit itself. The installer is
responsible for ensuring that this
type number is legible at access
level 1.
The hardware version and
production data are visible on the
type number plate of each unit of
the Plena Voice Alarm System. The
installer is responsible for ensuring
that this type number plate is
identifiable at access level 1, 2 or 3.
Compliance
Test have been carried out during
certification of the Plena Voice Alarm
System.
Plena
Signature
Signature
Bosch Security Systems B.V.