Bosch Plena Operating Manual page 165

Plena
13 Design requirements
Clause / Requirement
13.1 General requirements and
manufacturer's declarations
13.1.1 The VACIE shall comply with the
design requirements of this clause, where
relevant to the technology used. Some
requirements can be verified by testing.
Others can only be verified by inspection
of the design and its accompanying
documentation because of the
impracticability of testing all of the
possible combinations of functions and of
establishing the long-term reliability of
the VACIE.
13.1.2 In order to assist the process of
design inspection, the manufacturer shall
declare the following in writing:
a that the design has been carried out in
b that the components of the VACIE
13.2 Documentation
Bosch Security Systems B.V.
accordance with a quality
management system which
incorporates a set of rules for the
design of all elements of the VACIE;
have been selected for the intended
purpose and are expected to operate
within their specification when the
environmental conditions outside the
cabinet of the VACIE comply with
Class 3k5 of EN 60721-3-3:1995 +
A2:1997.
Installation and Operation manual
Compliance
Plena Voice Alarm System is
compliant.
See the relevant clauses regarding
testing and documentation.
The Bosch Security Systems B.V.
development department
responsible for development/
maintenance of the Plena Voice
Alarm System works according its
own development process,
Standard Development Process or
SDP.
Rules for the design of all elements
of the Plena Voice Alarm System
can be found in the TPD
(document repository). In the SDP
repository all process descriptions,
process implementation
documents, templates, guidelines,
etc. of the development processes
can be found.
The Plena Voice Alarm System was
designed as a compliant voice
alarm system.
Plena Voice Alarm System is
compliant.
Appendices | en 165
Signature
2013.07 | V2.0 |