Operation
4.
Once the outboard motor is supported
with the tilt support lever, press the power
trim and tilt switch "
the trim rods. NOTICE: Make sure that
the trim rods retracts completely dur-
ing mooring. This protects the rods
from marine growth and corrosion,
which could damage the power trim
and tilt mechanism.
53
" (down) to retract
[ECM00252]
ZMU07399
EMU42700
Procedure for tilting down (power trim
and tilt models)
1.
Push the power trim and tilt switch "
(up) until the outboard motor is supported
by the tilt rod and the tilt support lever be-
comes free.
2.
Release the tilt support lever.
3.
Push the power trim and tilt switch "
(down) to lower the outboard motor to the
desired position.
DN
DN
"
ZMU07546
"
ZMU04196
ZMU04603