Cowling Lock Lever (Pull Up Type); Flushing Device - Yamaha F200B Owner's Manual

Components
ECM00660
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard mo-
tor could shake loose from the tilt support
and fall. If the motor cannot be trailered in
the normal running position, use an addi-
tional support device to secure it in the tilt
position.
EMU31421

Cowling lock lever (pull up type)

To remove the top cowling, pull up the cowling
lock lever(s) and lift off the cowling. To install
the top cowling, place it in its original position,
and then move the cowling lock lever(s)
downward to lock it in place.
TIP:
When installing the cowling, check to be
G
sure it fits properly in the rubber seal.
23
Be sure to check that the gap between the
G
top cowling and the bottom cowling is even
all around the cowling. If the top cowling is
loose or the gap is not even, reinstall the
cowling.
1. Cowling lock lever(s)
1
1. Cowling lock lever(s)
EMU26463

Flushing device

This device is used to clean the cooling water
passages of the motor using a garden hose
and tap water.
1
ZMU05347
ZMU05349