Dp (System Dump) - NEC NX7700i/5080H-32 Operation Manual

2.4.6.3.

DP (System Dump)

m
X
* The command is executable to the active partition (after automatic system boot/UP
command execution).
Function:
This command causes a Dump interrupt to the system after a system dump is taken.
Whether a system dump is actually taken or not, or a system reset is subsequently activated or
not, depends on the system software (OS or BIOS). This command only causes a Dump
interrupt.
Nothing will happen, of course, if the software is not running.
(Screen Example)
iSPyz:--->
Dump button interrupt will be generated.
Enter partition number (0-7/all/CR=exit) :
Execute OK? (y/[n])
DP command was accepted. Dump button interrupt will be generated soon.
[iSPyz:INFO.ccc] partition 0 : dump button interrupt.
[iSPyz:INFO.ccc] partition 1 : dump button interrupt.
:
:
:
(Description)
Description
No.
(a)
(b)
(c)
(d)
b u
<ENTER>
dp
<ENTER>
y
Enter the target partition number here.
If "all" is specified, all the existing partitions are the target of this command.
A confirmation message appears.
If you are sure to continue command execution, enter "y."
A "DP command accepted" message appears.
Actual processing progresses in the background.
Shows progress in the background.
<ENTER>
all
Description
2-39
Base Module
Description
No.
(a)
(b)
(c)
(d)
855-900547-200