Table of Contents
Advertisement
Base Module
2.3.
Consoles
The base module contains console interfaces as standard equipment. The consoles connected
to the interfaces provided by the iSP are roughly classified into two:
• OS console (also called the system console or SW console) to display BIOS/OS messages
• SP console (also called the HW console) to display SP messages
2.3.1.
SP Console
The SP console requires:
• Recommended Windows2003 operation environment
• Two or more LAN ports (for duplicated iSP configuration)
On the subsquent pages, Figure 2-15 shows the console connection diagram for the single iSP
configuration, and Figure 2-16 the console connection diagram for the duplicated iSP
configuration.
The iSP-M standard I/O interface connected to "Console PC" in these figures is:
• Ether Port (10/100Base-TX)
855-900547-200
2-16
Advertisement
Table of Contents
