Table of Contents
Advertisement
Base Module
2.2.10.
DVD-ROM Unit
One DVD-ROM unit can be installed for each I/O module. A DVD-ROM unit is mounted on each
I/O module in the main cabinet as standard equipment. The DVD-ROM and CD-ROM media
can be used on the DVD-ROM unit.
2.2.10.1. Loading and Unloading Media
(1) Loading DVD-ROM/CD-ROM
1) Remove the front filter cover of the I/O enclosure (loosen the hand screw).
2) Push the Eject button lightly, and the tray pops out.
3) Place DVD-ROM/CD-ROM securely on the tray.
4) Push the Eject button lightly, and the tray goes back in the drive.
(2) Unloading DVD-ROM/CD-ROM
1) Be sure that the DVD-ROM drive access indicator LED (orange) goes off.
2) Push the Eject button lightly, and the tray pops out.
3) Take out DVD-ROM/CD-ROM.
CAUTION
Figure 2-10 Loading and Unloading DVD-ROM/CD-ROM
855-900547-200
Be careful not to touch the tray while it recesses in the drive
unit to prevent hand injury.
2-10
Advertisement
Table of Contents
