Table of Contents
Advertisement
CHAPTER 3 Operation Procedure
3.1.
System Startup
3.1.1.
System Startup Procedure
When all installation is completed, the system can be started by following the system startup
procedure. The procedure to turn on the AC power with the AC switch is explained in this section.
When a UPS is connected, turn on the AC power from the UPS. Refer to the UPS manual for the
AC power-on procedure. The system startup flowchart is shown in the next page.
CAUTION
Be sure that all inputs and outputs have been installed and
upgraded.
3-1
Operation Procedure
855-900547-200
Advertisement
Table of Contents
