Sp Console Messages - NEC NX7700i/5080H-32 Operation Manual

3.2.2.

SP Console Messages

The SP console messages displayed during system shutdown are explained in this section.
1) Example of DC power off display on SP console screen
>> SP LOG MESSAGE START (07:6M) <<
11/28/2005 10:52:09 0------- System shutdown started. (SPFW:R00.35)
>> SP LOG MESSAGE END <<
[iSP0m:INFO.ccc] partition 0 : start-up processing was canceled due to shutdown
request.
[iSP0m:INFO.ccc] partition 0 : turning off CELL(s)...
[iSP0m:INFO.ccc] partition 0 : turning off PCIBAY(s)...
[iSP0m:INFO.ccc] partition 0 : turning off XBX_C(s)...
[iSP0m:INFO.ccc] partition 0 : turning off POWBAY(s)...
>> SP LOG MESSAGE START (07:6M) <<
11/28/2005 10:52:16 0------- System shutdown completed. (SPFW:R00.35)
>> SP LOG MESSAGE END <<
[iSP0m:INFO.ccc]
************************************************
* All DC power has been turned off.
* You can turn off AC power.
************************************************
*
*
3-11
Operation Procedure
=> DC is off now, and
AC can be turned off.
855-900547-200