7 Appendix
8
Pull back and arrange the cables from
the top of the print head assembly.
9
Install the print head to the print head
assembly.
Align the print head and press the print head
upward until it is latched.
10
Attach the cover back to the top of the
print head assembly with the
thumbscrew .
CAUTION
When attaching the cover, be careful not to clamp the
wire.
After replacement
• Adjust the print darkness.
• Make sure that the print head opens and closes without difficulties.
7.7.2
Replacing the Platen Roller
You can easily remove and replace a damaged or worn platen roller.
1
Make sure that the printer is in power off
mode, then disconnect the power cord
from the AC outlet.
2
Open the top cover.
CAUTION
Open the top cover fully to prevent accidental drop of
the cover.
248
S84-ex/S86-ex Operator Manual
7