Connecting To The Network Through Lan Interface - Pioneer VSX-922-K Operating Instructions Manual

03
2 VSX-1122 only: Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver.
Sub zone (ZONE 2)
VSX-1122 only
VIDEO IN
2
AUDIO IN
R L
1
MULTI-ZONE setup using speaker terminals (ZONE 2)
You must select ZONE 2 in Speaker system setting (page
1 Connect a pair of speakers to the surround back speaker terminals.
You should have a pair of speakers attached to the surround back speaker terminals as shown below.
2 VSX-1122 only: Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver.
Sub zone (ZONE 2)
VSX-1122 only
VIDEO IN
2
L R
1
Main zone
AUDIO
ZONE 2
L
OUT
ZONE 2
OUT
DVR/BDR
R
IN
DVD
IN
AUDIO
ZONE 2 L
OUT
ZONE 2
DVR/BDR OUT
R
IN DVD
IN
78) to use this setup.
Main zone
ZONE 2
OUT
SURROUND BACK / ZONE 2
R L (Single)
ZONE 2
OUT
SURROUND BACK / ZONE 2
R L
(Single)

Connecting to the network through LAN interface

By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen
to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored on the components on the local network, including
your computer.
LAN (10/100)
to LAN port
NAS
PC
Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server func-
tion, it is necessary to set up the network manually. For details, see
LAN terminal specifications
! LAN terminal : Ethernet jack (10BASE-T/100BASE-TX)
Note
! Refer to the operation manual of the equipment you have as the connected equipment and connection method
may differ depending on your Internet environment.
! When using a broadband Internet connection, a contract with an Internet service provider is required. For
more details, contact your nearest Internet service provider.
28
Connecting your equipment
LAN
(10/100)
Internet
Modem
LAN
Router
3 2 1 WAN
LAN cable (sold separately)
to LAN port
Network Setup menu on page 80.