Samsung SND-3082 User Manual page 36

installation & connection
connecting to audio input/output
Microphone
Microphone
Speaker
1. Connect the MIC port of the camera with the microphone directly or LINE OUT port
of the amplifier that the microphone is connected to.
2. Connect the SPEAKER port of the camera with the LINE IN port of the speaker.
3. Check the specifications for audio input.
y audio codec
G.711 PCM. μ-law 64kbps 8kHz sampling
y full duplex audio
y audio in
Used for mono signal line input (Max.2.4 Vpp)
y audio out
Used for mono signal line output (Max.2.4 Vpp)
y Line out impedance
600Ω
36_ installation & connection
Amp
Amp
Speaker
Microphone
PC
Network