Adjusting The Zoom And Focus - Samsung SND-3082 User Manual

installation & connection
adjusting the monitoring direction for the camera
` adjusting the monitoring direction
You can adjust the camera direction only when the camera is fixed on the ceiling.
Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called
Tilt, and turning the lens on its axis is called Rotate.
- The effective range of pan is a total of 355 degrees.
- The effective range of rotation is a total of 355 degrees.
- The effective range of tilt is a total of 90 degrees.
In some angles, the top cover may cause cutting some part of the monitoring object.
`
J
` methods of adjustment
1. After installing the camera, adjust the panning angle in consideration of the
monitoring direction.
When tilting the camera, you should adjust the horizontal angle lest that the image
be displayed reversely.
2. Adjust the rotation angle to correct the image display position (up/down/left/right).
Rotating means rotation on the basis of the rear lens unit.
`
3. Adjust the tilt angle so that the camera faces toward the monitoring object.

adjusting the zoom and focus

Watch the camera's real time video and rotate the "Zoom lever" to zoom in/out the subject
as you want.
Rotate the "focus lever" until the image looks clear.
For the position of the Zoom lever and Focus lever, refer to the "Components" (page 15, 19, 22).
`
It is recommended to install the camera 2.5M~10M high above from the floor.
`
M
30_ installation & connection
Panning
Tilting
Tilt adjustment screw
Lens rotation