Samsung SND-3082 User Manual page 24

installation & connection
3. Hold down the lock lever in the outer direction as shown
and turn the camera body in the <unLocK> direction
(counter clockwise) to remove the bracket from the
body.
If it fails, take the bottom hole of the bracket and turn the
`
bracket in the <LOCK> direction (clockwise) to remove it.
installation
1. Use the provided screws (x3) to fix the bracket to a desired position (ceiling or wall).
Ensure that the <CAMERA FRONT> label on the bracket faces the direction for camera monitoring.
`
2. Arrange the cables through the bracket to
the ceiling or wall.
If you drill a hole in the ceiling cover for wiring, press
`
hard to remove the cover and attach the dust-proof
plate to it, and arrange the cables through the plate.
If you intend to arrange the cables without drilling a
hole, use the empty area opposite to the <CAMERA
FRONT> label side for the wiring purpose.
3. Mount the camera body onto the bracket.
Align the marking hole of the camera body with
the <camera front> label of the bracket,
and turn the body in the <LocK> direction.
4. Refer to "adjusting the monitoring direction
for the camera" to adjust the lens in a desired
direction.
5. Close the top cover.
Fit the top cover into the fixing tips of the camera
`
body and turn the cover clockwise.
24_ installation & connection
Camera Body
Bracket
Wiring Cover