Table of Contents
Advertisement
inStaLLation (SnD-3082f)
installation
1. Use the provided template to drill one hole for
the camera, and one for the screw (5 mm in
diameter, at least 35 mm in depth), and insert
the plastic anchor (HUR 5) to the end of the
screw hole.
2. Connect and arrange the necessary cables
lest that they should be damaged or twisted
while installing the camera.
3. Insert the camera body into the hole so that it
fits to the camera hole, and fix the body using
the ASSY tapping screws (TH M4xL30). (x3)
4. Refer to "adjusting the monitoring direction for the camera" to adjust the lens in
a desired direction.
5. Close the top cover.
Fit the top cover into the fixing tips of the camera body and turn the cover clockwise.
`
ceiling mount
1. Use the provided template to drill one hole for the
camera, and one for the screw (5 mm in diameter,
at least 35 mm in depth), and insert the plastic
anchor (HUR 5) to the end of the screw hole.
2. Connect and arrange the necessary cables (power,
video, etc) lest that they should be damaged or
caught while installing the camera.
3. Insert the camera assembly into the hole
so that it fits to the camera hole, and fix the
assembly using the assembly screw tappings
(TH, M4xL30). (x3)
4. Close the dome cover.
5. Fix the cover to the main unit. Fit the protruding
part inside the cover into the corresponding
hole of the main unit, and turn the cover to fix it.
English _25
Hide quick links:
Advertisement
Table of Contents
