DSL-504T DSL Router User's Guide
Port Mapping and Priority Setting
To set QoS for the router, first click the Port Mapping QoS check option in the middle of the window.
This will open the menu pictured below. Select the PVC (PVC0-PVC7) that will associate with the
corresponding port and choose a priority for this combination. If a single PVC (PVC0) is used for the ADSL
account, this menu can be used to set QoS priority settings for each Ethernet port.
An example where port mapping and priority can be used is an ADSL account with two PVCs (virtual
connections) where one PVC is dedicated to VoIP traffic. The highest priority, 1, is set for a single
Ethernet port that is mapped to the VoIP-dedicated PVC. The three remaining Ethernet ports and wireless
traffic are mapped to the other PVC and assigned a lower priority. It may also be useful to set a
bandwidth limit for the lower priority ports.
QoS Priority Configuration and Port Mapping menu
To set a maximum Bandwidth in kbps (Auto, 64 to 1024), use the drop-down menu Bandwidth menu for
each port. The Auto setting automatically chooses the most appropriate limit.
Click Apply to set the configuration.
77