Table of Contents
Advertisement
SNMP
Simple Network Management Protocol is a standard for internetwork and intranetwork management.
Configure these parameters for SNMP on the Router:
SNMP Category
SNMP Management
Community
Traps
DSL-504T DSL Router User's Guide
SNMP Management menu
Parameters
This is used to enable or disable SNMP Agent and SNMP Traps or edit client
SNMP Name, Location and Contact.
•
Enable SNMP Agent: Click to select enable or disable SNMP Agent.
•
Enable SNMP Traps: Click to select enable or disable SNMP Traps.
Use this edit client community for server SNMP access.
•
Name: Edit community Name.
•
Access Right: Access Right may choose ReadOnly or ReadWrite.
The management agent can send an event notification to the management
system to identify the occurrence of conditions such as threshold that
exceeds a predetermined value.
•
Destination IP: Insert destination IP address to launch trap
message.
•
Trap Community: Insert Trap Community name.
•
Trap Version: Drop-down menu allows you to select SNMP v1 or
SNMP v2c.
63
Advertisement
Table of Contents
