D-Link DSL-504T User Manual page 37

Using the Setup Wizard - For Static IP Address connections:
1. Select the specific Connection Type from the drop-down menu. The available Static IP Address
connection and encapsulation types are 1483 Bridged IP LLC, 1483 Bridged IP VC-Mux, 1483
Routed IP LLC, 1483 Routed IP VC-Mux and IPoA.
2. Change the IP Address, Subnet Mask, ISP Gateway Address, Primary DNS Address, and
Secondary DNS Server IP Address as instructed by your ISP. For IPoA connections it may also
be necessary to change the ARP Server Address. IPoA connection users who have not been
given this information should leave the field blank.
3. If you are instructed to change the VPI or VCI number, type in the correct setting in the
available entry fields. Most users will not need to change these settings. The Internet connection
cannot function if these values are incorrect.
4. Click Next to go to the Setup Completed pop-up window.
DSL-504T DSL Router User's Guide
29