Specifications; Nail Selection - Hitachi NC 40G Handling Instructions Manual

English

SPECIFICATIONS

1. Gas Concrete Nailer (NC40G)
Type of power
Applicable nails
Numbers of loadable nails
Size
Weight
Nail-feeding method
Ambient temperature
Battery
Fuel cell
2. Charger (UC7SD)
Input power source
Charging time
Charging voltage
Charging current
Weight

NAIL SELECTION

Choose a suitable nail from Fig. Nails which are not shown
in Fig. can not be driven with this tool.
Only smooth, barbed and ring type nails are used. Do
not use screw nails. Nails are formed into strips which
consist of 40 nails.
The use of any other nails can result in tool malfunction
and/or nail breakdown, leading to serious injuries.
Plastic-collated strip nails
9
420 mm (L) × 352 mm (H) × 108 mm (W)
Type No. 753-600 ........ sold separately
Liquid hydrocarbon; propane, butane 40g/80ml
Approx. 60 minutes (At temperature of 20°C (70°F))
Min. Max.
6.3 mm 6.3 mm
(.250") (.250")
2.6 mm 2.6 mm
(.102") (.102")
Piston reciprocating
ø 2.6 mm (.102") See Fig.
40 nails (4 strips)
(16-1/2" × 13-7/8" × 4-1/4")
3.7 kg
Piston reciprocation
0°C to 40°C (32°F to 104°F)
EB714S ( 1.4 Ah 6 cells )
Ni-Cd battery, 7.2 V
Single phase: AC 230 V 50 Hz
7.2 V
1.6 A
1.1 kg (2.4 lbs)