Outline Of Operation Control By Microcomputer; Operation Control Function By Remote Control Switch - Mitsubishi Heavy Industries SRK20HG-S Technical Manual

4

OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER

4.1 Operation control function by remote control switch

Remote control
Models All models
◆ Operation selection
FAN SPEED button
Each time the button is pushed, the
indicator is switched over in turn.
HI POWER/ECONO button
This button changes the HIGH POWER/
ECONOMY mode.
TEMPERATURE button
This button sets the room temperature.
(This button changes the present time and
TIMER time.)
ON TIMER button
This button selects ON TIMER operation.
SLEEP button
This button selects SLEEP operation.
CLEAN switch
This switch changes the CLEAN mode.
◆ Indication selection
CLEAN indicator
Indicates during CLEAN operation.
SLEEP indicator
Indicates during SLEEP operation.
TEMPERATURE indicator
Indicates set temperature.
(Does not indicate temperature when operation
mode is on AUTO)
FAN SPEED indicator
Indicates set air flow rate with
HI POWER/ECONO MODE indicator
Indicates during HIGH POWER/ECONOMY
mode operation.
• The above illustration shows all controls, but in practice
only the relevant parts are shown.
lamp.
Indicates during ON/OFF TIMER operation.
Indicates present time or timer setting time.
Shows selected flap mode.
10
- -
OPERATION MODE select button
Each time the button pushed, the
indicator is switched over in turn.
ON/OFF (luminous) button
Press for starting operation, press again
for stopping.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/down) mode.
OFF TIMER button
This button selects OFF TIMER operation.
RESET switch
Switch for resetting microcomputer and
setting time.
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
ON/OFF TIMER indicator
OPERATION MODE indicator
Indicates selected operation with
(Auto) • (Cool) • (Heat) • (Dry)]
[
TIME indicator
AIR FLOW indicator
lamp.