Adhension Standard - Radio Shack TRS-80 Service Manual

All and more about Sharp PC-1500 at http://www.PC-1500.info
6. ADHENSION STANDARD
The table below shows points on the cJamps where adhesion is to be appUed to lock the screws as weU as adhesion points on the
printer bearinr;;. Make sure that more than l /4 of the screw heads ve glued, but that no adhesive is present in the screw head
rec. e ssion.s.
No.
1\dhesion Point
Adhesive
Remarks
I
X-motor unit set-screws in 2 places
Screw lock
Phillips type pan head machine screws (SP2.3 x 3)
Phillips type pan head machine screws (SP2 x 3)
2
Bobbin gear unit wire set.screws ( I place)
Screw lock
Phillips type pan head machine screws (SP2 x 3)
3 Slider unit wire set-screws
(I
place) Screw lock
Phillips type pan head machine screws (SP2 x 3)
4
Y-n1otor unit set-screws 2 places
Screw lock
Phillips type pan head machine screws (SP2.3 x 3)
Phillips type pan head machine screws (SP2 x 3)
5 Electromagnet unit set-screws in one place
Screw lock
Phillips type pan head machine screws (SP2.S x 3)
6 Reed switch unit set-screws
in one
place
Screw lock
Phillips type pan head machine screws (SP2 x 3)
7 Color change click set -screws
Screw lock
Phillips type pan head machine screws (SP ! .4 x 1.6)
8
Rubber roller unit bearing and side plate
Cyanoacrylate adhesive
VISCA NS-10
(Matsumoto Trading)
Do not sale this PDF !!!
- 65-