Melitta Caffeo Passione Operating Instructions Manual page 97

Problem
Coffee does not flow.
When foaming milk,
there is not enough
milk foam.
Although the bean
container is full, the
appliance indicates
that coffee beans must
be filled.
Loud grinder noise.
With the My Bean
Select® function, the
display goes off when
the measuring spoon is
put back on.
Brewing unit cannot be
inserted after remov-
ing.
Rapid alternate flash-
ing of the displays:
Rapid alternate flash-
ing of the displays:
The display lights up
without having been
activated:
Cause
Water tank is not filled
or is not correctly
inserted.
Brewing unit is
clogged.
Selector switch is not in
the correct position.
Cappuccinatore is
soiled.
Coffee beans do not
drop into the grinder.
Foreign objects in the
grinder.
There are less than 8 g
of coffee beans in the
bean chute.
Handle for the locking
mechanism of the
brewing unit is not in
the correct position.
Drive is not in the cor-
rect position.
Software problem.
Brewing unit is not
inserted.
Appliance is not fully
vented.
Problems
Action
Fill the water tank and ensure
ƒ
it is positioned correctly (see
chapter 4.4 one page 68).
Clean the brewing unit (see
ƒ
chapter 8.2 one page 85).
Turn the selector switch to
ƒ
the correct position (see sec-
tion 6.6 one page 78).
Clean the Cappuccinatore (see
ƒ
section 8.3 one page 87).
Press a direct key.
ƒ
Tap lightly on the bean con-
ƒ
tainer.
Clean the bean container.
ƒ
Coffee beans are too oily. Use
ƒ
different coffee beans.
Contact the hotline.
ƒ
Top up coffee beans (see sec-
ƒ
tion 5.1 one page 73).
Check that the handle for the
ƒ
locking mechanism is correctly
engaged (see section 8.2 one
page 85).
Press and hold button. Also
ƒ
press the ON/OFF button. The
appliance initialises. Release
buttons again.
Switch the appliance off and
ƒ
on again (see chapter 4.1 one
page 66).
Contact the hotline.
ƒ
Insert brewing unit.
ƒ
Vent the appliance, turn the
ƒ
rotary regulator clockwise to
the stop for this. As soon as
water flows out of the Cap-
puccinatore, turn the rotary
regulator anti-clockwise to
the stop.
Clean the brewing unit (see
ƒ
section 8.2 one page 85).
97