Melitta Caffeo Passione Operating Instructions Manual page 91

CAUTION
Hot water and hot steam flowing out of the pipe
Do not touch the steam pipe during and immediately after use.
ƒ
Wait until the steam pipe has cooled down.
ƒ
ATTENTION
Use of unsuitable descaling agent may damage the appliance.
Only use the Melitta® ANTI CALC Espresso Machines liquid descaling
ƒ
agent.
ATTENTION
A water filter may be damaged if it is screwed in during the descaling
programme.
Remove the water filter when the appliance requests you to do so.
ƒ
Place the water filter into a vessel filled with tap water during the descal-
ƒ
ing programme.
The water filter can be reinserted and reused on completion of the des-
ƒ
caling programme.
Requirement: The appliance is ready for operation. 0.5 litres of descaling
solution has been prepared and is ready for use.
Symbol on the Displays
selector switch
or buttons
Steps
1. Press the "Service" button and also the
"Steam dispensing" button for longer
than 2 seconds.
» The appliance indicates that:
ū the descaling program is run-
ning
ū the first programme stage is
reached
ū the drip tray and the coffee
grounds container must be
emptied.
2. Empty the drip tray and the coffee
grounds container (see section 4.8
Emptying the drip tray and coffee
grounds container on page 72).
Care and maintenance
91