Melitta Caffeo Passione Operating Instructions Manual page 92

Care and maintenance
Symbol on the
selector switch
or buttons
92
Displays Steps
3. Turn the selector switch until the set-
ting for hot water points upward.
4. Insert the drip tray without the coffee
grounds container.
»
5. Place the coffee grounds container
beneath the Cappuccinatore.
6. Open the lid of the water tank and
pull the water tank upwards out of the
appliance by the handle.
7. Fill 0.5 litres of descaling fluid into the
water tank. Observe the correspond-
ing instructions for use of the fully
automatic coffee maker descaling
agent.
8. Insert the water tank again.
»
»
9. Turn the rotary regulator clockwise up
to the stop.
»
»
10. Empty the drip tray and the coffee
grounds container.
The appliance indicates that:
ū the second programme stage is
reached
ū the water tank must be filled.
ū Descaling fluid must be filled
into the water tank.
The descaling process starts.
After several minutes, the appli-
ance indicates that:
ū the third programme stage is
reached
ū the steam dispensing is ready.
The descaling process is continued.
After several minutes, the appli-
ance indicates that the drip tray
and the coffee grounds container
must be emptied.