Table of Contents
Advertisement
(2) Place the ribbon mask in the head as-
sembly. At this time, align the holes of
the ribbon mask with the protrusions
of the head assembly.
Note: The ribbon mask is very thin, so
take care not to bend it when in-
stalling it.
(3) Install the head return spring in the
head assembly.
3-3-3 Setting the paper feed assembly
(1) Apply Froil G-311S to the two parts of
the paper feed roller shaft where pa-
per feed bracket touches.
(2) Apply Epnoc grease AP to the brake
groove of the paper feed roller.
Note: The paper feed roller must be
free from sticky oil.
(3) Place the paper feed roller in the pa-
per feed bracket. At this time, the
longer shaft should be inserted first.
— 16 —
Advertisement
Table of Contents
