Table of Contents
Advertisement
(26) Apply Froil G-311S to the tip of the re-
set arm and the two shaft bushings of
the head assembly.
(27) Set the shaft pin in the head assem-
bly.
(28) Hang one end of the head return
spring, which is set in the head assem-
bly, on the notched section of the right
of the head assembly.
(29) Insert the tip of the shaft pin, which is
set in the head assembly, in the groove
of the cylinder cam assembly.
Note: Before insertion, the squared
notch of the cylinder cam as-
sembly should face the back and
the head assembly should touch
the right of the frame assembly.
— 24 —
Advertisement
Table of Contents
