Specifications; Printing Specification; Paper Specification - Casio UP-400 Service Manual

1. SPECIFICATIONS

1-1. PRINTING SPECIFICATION

Printing method:
Dot pitch:
Printing speed:
Printing width:
Character structure:
Printing columns:
Character size:
Fonts:
Feed speed:
Interface:
Command:
Paper width & diameter:
Thermal head life:
Cutting method: *2
Operating temperature:
Storage temperature:
Dimension:
Transfer speed:
Supply voltage in standby:
Mean current:
Power consumption:
Weight:
Barcode alignment:
Near end sensor:
*1 Manufactured by SIIP&S Inc. (Former name: Seiko Instruments Inc.)
*2 CAUTION: Paper must be fed 3 mm after cutting to prevent paper jam.
*3 These values vary according to environmental temperature when printed font A (12 × 24) with a rolling
pattern.

1-2. PAPER SPECIFICATION

Paper Width:
Paper roll size:
Specified paper:
Paper roll spool diameter: Inside
NOTE: The end of the paper roll must be free to come off the spool when finished. It must not be adhesively
attached or attached in another semi-permanent manner.
Direct Line Thermal
8 dot / mm
210 mm per second (Max.)
72mm / 576 dots
8 x 16 (font B)
64 columns / line
1.00 x 2.00
US-ASCII, Katakana, international characters
220 mm per second
RS232C (serial), 10/100 Base - T/ TX
ESC / POS compliant
80 mm (W) x 80 mm Dia. Max.
100 Million Pulses / 100 km or more
Partial cut (one point left uncut) *2
5 °C ~ 35 °C
-20 °C ~ 60 °C
145 mm (W) x 193.2 mm (L) x 120.1 mm (H)
38.4 kBps (Max.) : RS-232C
24V DC / 100mA
Approx. 1.3 A *3
Approx. 40 W *3
1.1kg
○
Near end sensor
79.5 ± 0.5mm (3.13 ± 0.02")
Roll diameter:
Take-up paper roll width:
Specified thermal roll paper:
[Paper:TF50KS-E2C Nippon Paper Industries Co., Ltd.]
Packaged roll paper:
[Paper:PD160R-N (Oji Paper Mfg. Co., Ltd.)]
*The following paper can be used instead of the paper above:
Paper: HP220AB1 (Mitsubishi Paper Mills Ltd.)
12 mm (0.47")
Outside 18 mm (0.71")
– 1 –
12 x 24 (font A)
44 columns / line
1.50 x 3.00
Maximum 80 mm (3.15")
80 + 0.5/-1.0mm (3.15 + 0.02/-0.04")
NTP080-80