NComputing VSPACE L130 User Manual page 42

the console software. If this feature is turned on (set to any whole number up to 999), the same
behavior applies, but when a session is disconnected, a timer starts. If the user reconnects before the
timer is up, their disconnected session is reconnected to their new session and all their open files and
applications are available again. If the timer runs out and the session is still disconnected, the vSpace
software will end the session by itself. This makes sure that disconnected sessions do not reserve
resources for an indefinite period. By default, this is set to "5."

Support WTSAPI32 Interface: Displays whether or not the vSpace software has turned on support for
the WTSAPI32 interface.

Disable background-bitmaps under Windows XP: Displays whether or not the user is able to set
their own background bitmap for their Windows desktop.

Do not display last user name: Displays whether or not the vSpace software displays the last user
name that logged on using a particular access device. This is sometimes enabled as a security
measure.

UTMA/UTSA USB port support: Displays whether the administrator has set the vSpace software to
allow using the USB port on L230 access devices.

Administrator Password: Displays whether an administrator password is set.

Autologon on the Host Station: Displays whether the host PC is set to boot up without the Windows
logon screen showing on the host PC.

Background Hardware Activation: Displays whether the software silently activates newly-connected
devices.

Video Streaming Support: Displays whether the host will provide streaming video to compatible
devices. (L300 only)

Accelerate Flash Globally: Displays whether the host will leverage video streaming to deliver high-
quality Flash to the access device at the cost of higher processor utilization.

Compression Ratio (5-95 %): Displays the level of compression used on the access device's real-time
output. A higher number results in higher display quality at the access device, but also utilizes greater
network bandwidth.
USB-Device Assignment(s)
Note: This feature is only available on the L200 (older model), L230, and L300.
L300/L230/L130 User Manual
42