NComputing VSPACE L130 User Manual page 39

L300/L230/L130 User Manual
Note: The "View Station" button may not be present if this function is disabled. The "View Station" button is not
present when you select the session that you are currently using.
To send a message to a session, select the session and click on the "Send Message" button in the toolbar.
The "Broadcast" tab allows you to select an access device to send the message to, a "From" entry, and a
message. The access device must be connected to the same host PC. The "Network Broadcast" tab allows
you to send a message to an access device that is connected to the same host PC or a different host PC on
the same network.
To view a session's screen, select the session and click on the "View Station" button. When viewing a
session's screen, you may select whether or not to control the mouse and keyboard remotely and whether or
not to allow the user to control the mouse and keyboard. To see and change these settings, right-click on the
title bar of the session view to bring up a menu. There are two settings, "Controlled by TS Admin" and "User
Input Allowed."
To stop a session, select the session and click on the "Stop Station" button
Information & Settings
The "Product Information" tree item shows information about the host's vSpace software.
39